| Customization: | Available |
|---|---|
| CAS No.: | 70131-67-8 |
| Bonding Function: | Neutral Silicone |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Base | Neutral Silicone |
| Color | Black (after mixed) |
| Packaging | 180L+18L, 189L+18L |
| Net Weight | 480g/Cartridge |
| MiXing | 10:1-11:1 by volume |
| Shelf life | 12 months |
| Storage | Store in the cool and dry place, under 27ºC |
| Description | ACE-165 is a two component, neutral curing, silicone sealant, specifically designed for secondary sealing of insulated glass units (IGU). Elastomer sealing with excellent weather resistance and temperature tolerance is formed by mixing and curing of the two components at the designed ratio. |
| Limitations |
As the primary or single seal in an insulating glass unit. For structural bonding applications. In totally confined spaces. On the surface of substrate that bleeds oil, plasticizer or solvent and so on (such as impregnated wood). In contact with or exposed to sealants that liberate acetic acid. In continuous water immersion or on the surface with fog, or wet surface, or in continuous wet place When substrate surface temperature beyond 40º C or below 10º C. |
| Primer |
Priming is not usually required when using antas-165. However, sealant adhesion should always be tested to determine the need for a primer. If required, primer should be applied in a thin film to the joint surface by using a clean lint-free cloth and allowed to dry before sealant application. |
| Curing and Maintenance | ACE-165 begins curing when it contacts with the moisture in air. It generally cures 2mm/day, and takes 21 days for fully-cure. In the beginning of using the sealant, please remain the sealant places fixed and flat. Solvent can be used to clean the fractured sealants and then fill up with the new sealants with same color and quality. |
| Mixing | To obtain ultimate physical properties, antas-165 should be thoroughly mixed using an airless mixing system. The cure rate may be adjusted by changing the base to the curing agent mix ratio from 9:1 to 13:1 by volume. The recommended mix ratio of the base to curing agent is 11:1. |
| Safety | It is nontoxic after entirely cured. Avoid direct contact with eyes when operating. If happened, rinse opened eye under running water for several minutes. During the curing process, sealant will release a small amount of organic molecules. Construction should ensure good ventilation. If necessary, take protective measures. Please keep children out of reach. |
| Technical Data | Tack free time | 1.2h |
| Slump | 0 | |
| Hardness Shore A | 45 | |
| Elastic recovery | 89% | |
| Tensile modulus | 0.86MPa (23ºC) | |
| Elongation at max load | 55% | |
| Adhesion failure area | 0 | |
| Thermal weight loss VOC | 2.1% | |
| Water | 2.7% | |
| vapor | 2.25g/(m2×d) | |
| transmission |
FAQ
1, Q:Are you manufacture or simply trading company ?
A: We are the manufacture , welcome you visit our factory.
2,Q: Do you provide free samples ?
A:We do provide free samples under the condition that you assume the express shipping cost
3,Q: How to place order ?
A: Please tell us the service you need, OEM or ODM, and the quantity , then we will make the PI for you.
4,Q: How did you test the product before they are packed?
A :We have the strict QC procedure , each product will be tested by three times with professional machine before packing.
5,Q:What's the delivery time ?
A: Usually 15-20 days after receiving deposit .
6,Q:Where is the shipping port ?
A:We ship the products via Huangpu port, Guangzhou or any other ports depend on your needs.
7,Q: What about the payment terms ?
A: 30% TT advanced payment , balance need to pay before shipment.
){kind=link}